IPCB-3519VS226-D29 IMX226 ARM A7+A17 Starvis 12MP 1/1.7" 4000x3000 8MP 4K 1/1.9" 4096x2160 IP Camera module 38x38

Empty

Total: $0.00

Checkout

Hupuu Electronics

A4CB-2441HS307 1/2.8" Sony IMX307 NVP2441H AHD TVI CVI Analog 4 in 1 Starlight 1080P 2MP HD Security CCTV Camera Module board

1/2.5" SONY IMX274 ARM A7 A17 4K 8MP 3840x2160 H.265 IP Camera BOARD

IPCB-3519VS226-D29 IMX226 Hi3519V101 Starvis 12MP 1/1.7" 4000x3000 8MP 4K 1/1.9" 4096x2160 IP Camera module 38x38

IPCB-3519VS226-D29 IMX226 ARM A7+A17 Starvis 12MP 1/1.7" 4000x3000 8MP 4K 1/1.9" 4096x2160 IP Camera module 38x38

SKU:

IPCB-3519VS226-D29

Category: Starlight Camera Board Starlight IP Camera Board IP Camera Board 12MP UHD 4K IP Camera Board Dual Board IP Camera Board 1/1.8 inch IP Camera Board

Video Coding Format: Analog (CVBS) H.264 H.265 H.265+

$238.00

Need parts to be Assembled for free? Please contact us, or leave message when checkout.

For batch orders please contact us.

Price: $232.50 - $238.00

Sensor Optical Format: 1/1.7"

Imaging Sensor: IMX226

Effective Pixels: 12MP

Hole Distance: 22mm

Bottom Group

Description

12MP Sony IMX226 CMOS sensor, double board size:38*38mm

support function: audio input/output,alarm input, reset, RS485, composite video, USB

H.265/H.264video coding, support dual streaming, Max resolution:4000*3000, color 0.0001Lux@F1.2

big sensor size 1/1.7"@12MP(4000*3000), 1/1.9"@4K(4096*2160), high resolution image, image is smooth, high resolution with lower streaming.

To ensure image quality and stable as real time browse

SKU No	IPCB-3519VS226-D29(12MP)
Hardware
Chipset	ARM A7+A17,1/1.7"@12MP 1/1.9"@4K 4096x2160 SONY IMX226 COMS sensor
Low illumination	Color 0.0001Lux@F1.2
SNR	≥50dB(AGC OFF)
WDR	DWDR>80db
interface
audio/talkway	1CH audio MIC input/ cable line input
audio output	support 1CH audio output
Analogvideo	support 1CH video loop out
I/O input output	support 1CH alarm input
IO interface	1CH reset
PTZ interface	support 1 x RS485 interface
USB interface	1pcs USB interface, support TF card storage expansion(MAX128G)
video coding
Coding format	H264, Baseline/Main Profile/High Profile coding H.265 Main Profile coding
Coding format	MJPEG
Main stream	40003000, 1-15fps 40962160 DCI 4K, 1-25(30)fps
Main stream	38402160 UHD 4K, 1-25(30) fps 25921944, 1-25(30)fps
Sub stream	704*576, 1-25(30)fps
Sub stream	640480, 1-25(30)fps 320240, 1-25(30)fps
Video compression rate	32Kbps-16Mbps able to continue adjusting, supportCBR/VBR
Subtitles overlay	support channel name, date time, streaming info overlay,overlay position able to adjust
Data transmission &storage
Data storage	Video, image files
Storage mechanism	Manual, auto(circulation, time, alarming switch volume,motion detection)
Alarm Data transmission	FTP, E-mail, browse, CMS
protocol support	TCP/IP, UDP, RTP, RTSP, TRCP, HTTP, DNS, DDNS, DHCP, FTP, NTP, PPPOE, SMTP, UPNP
WIFI protocol	802.11b/g/n, support WEP, WPA, WPA2 encryption protocol
ONVIF protocol	Standard ONVIF2.4 protocol
Client browse	Support IE6.0 and above(embeded Web Server in device) browse by browser
Mobile client	Support iPhone, iPad, Android
General Specification
Power supply	DC12V/POE(need external connect POE module)
Device power	3W(MAX)
Device size	38(length) * 38(width) *20(height)mm (without lens)
IR-CUT pitch of holes	22mm
Device weight	0.025Kg

JP1 powerinterface
1	DC 12V
2	video GND
3	Analog video CVBS output
4	GND
JE1 network interface
1	RJ45_1 (TX+)
2	RJ45_2 (TX-)
3	RJ45_3 (RX+)
4	RJ45_6 (RX-)
5	network connect indicator light (green light)
6	network status indicator light(yellow light)
J1 IR-CUT interface
1	IR-CUT control signal 5V
2	IR-CUT control signal 5V
J2 DC auto irisinterface
1	drive-
2	damping-
3	damping+
4	drive+
J5 IR light board interface
1	IR light board12V power output
2	GND
3	IR return signal input(range:0.8V-12V)
4	IR light enable control
JOV1 video loop outport
1	Analog video output
2	GND
J6 function interface
1	audio input
2	audio GND
3	audio output
4	GND
5	reset, resume to default setting
6	alarm input, effective for low level
7	NULL
8	NULL
9	RS_485+
10	RS_485-
JU1
1	GND
2	USB DP
3	USB DM
4	5V power output
J7
1	USB_DP
2	USB_DM
3	5Vpower output
4	GND
5	SD card pull-up resistance power
6	SD card detection signal
7	SD card time colock cable
8	SD card Data cable DATA3
9	SD card Data cable DATA0
10	SD card Data cable DATA1
11	SD card command cable CCMD
12	SD card connect power to enable GPIO
13	SD card Data cable DATA2
14	alarm output GPIO
15	NULL
16	NULL

Interface

This product not include cable by default, please visit ip camera cable to select prefer cable.

JP1 Power interface		Preview	Pitch
1	DC12V		1.25mm
2	Video GND
3	CVBS output
4	GND
JE1 Network interface			1.25mm
1	RJ45_1 (TX+)
2	RJ45_2 (TX-)
3	RJ45_3 (RX+)
4	RJ45_6 (RX-)
5	Network connection indicator light (green light)
6	Network status indicator light (yellow light)
Sensor board J1 IR-cut interface			1.25mm
1	IR-CUT control signal 5V-
2	IR-CUT control signal 5V+
Sensor board J2 DC auto Iris interface (Support automatic aperture model: -AI)			1.25mm
1	drive-	Depend on color definition of Lens
2	damp-
3	damp+
4	drive+
Sensor board J3 Power Auto Zoom lens interface (Support Electric lens model:-AZ)			1.25mm
1	Focus A-	Depend on color definition of Lens
2	Focus A+
3	Zoom A-
4	Zoom A+
5	Zoom B+
6	Zoom B-
7	Focus B-
8	Focus B+
Sensor board J4 No definition
J5 Infrared Light board interface			1.25mm
1	Infrared Light board12V power output
2	GND
3	LED feedback signal input(0.8V-12V)
4	Infrared Light enable control
J6 function interface			1.25mm
1	Audio in	Support powerless microphone and Line in
2	Audio GND
3	Audio out
4	GND
5	Reset
6	Alarm in 1, low level effective
7	Alarm in 2 (reserve), low level effective
8	Alarm out control GPO, 3.3V level signal
9	RS_485+
10	RS_485-
JU1 USB interface			1.25mm
1	GND	Support MT7601 / RT5370 USB wifi module. Support TF card extension board.
2	USB_DP
3	USB_DM
4	5V power out
J7 expandion board			FPC
1	USB_DP
2	USB_DM
3	System
4	SDIO Work Clock
5	SDIO Data3
6	SDIO Data2
7	SDIO Data1
8	SDIO Data 0
9	System
10	SDIO Order
11	SDIO Power enable control signal
12	SDIO Card detection signal
13	SDIO Pull-up resistor power out
14	Alarm out control GPO
15	System
16	DC5V Power out

Compitable Accessories

Compatible Cable

CBB-EPA2 Ethernet DC power Audio tail cable for ip camera module

From $1.12

CBW-EP Waterproof Ethernet DC power tail cable for IP Camera module

From $0.59

CBB-OBP-POE-DC power tail cable for ip poe 48v camera module with buildin POE

From $4.50

CBW-OBP-POE-DC power tail cable for ip poe 48v camera module with buildin POE module, Support POE / none POE + DC 12V power supply

From $3.60

CBW-EPA Waterproof Ethernet DC power Audio tail cable for IP Camera module

From $0.94

CBF-D29 Ethernet DC power Audio in out Alarm in out RS485 Reset Analog/cvbs tail cable for ip camera -D29 module

From $6.20

Download

IP Camera User Manual_V1.3.doc

Supports for private Protocol of Xmeye and other popular vendor, and full range of H.264, H.265, POE NVR (one key add, Plug-and-play);

Supports iVMS4200, XMeye CMS monitoring platform software;

Supports ONVIF 2.4 protocol;

Supports GB28181 Protocol;

Supports sub IP 11.x.x.x and 192.168.1.88 by default;

Supports HTTP CGI API;

WebCms 3.2.0.46 .zip IE activeX plugin

pConfig_1.0.1.66.zip modify camera configurations, such as WiFi, Default Language, MJPEG, Default IP address. The configuration will be the default configuration when you restore the settings.

DeviceSearch.zip

iVMS-4200(v2.6.2.7).zip HikVision protocol support

Basic FAQ for IE Browser.pdf

Quick Guide for IE Browser.pdf

IE Browser User's Manual.pdf

For Windows:

iVMS-4200: https://hupuu.com/sites/default/files/document/iVMS-4200(v2.6.2.7).zip

Support P2P remote monitor.
Support IE preview, Record(store to PC).

FAQ

What is default IP address, user and password?
Default IP:
192.168.1.88 for wired Ethernet;
192.168.1.160 for wifi;
For bulk operation, you can use sub ip 11.0.0.1 to find, config and upgrade as many cameras as you can.

Default user: admin
Default Password: admin
Does the camera support motion detect?
Yes, it support motion detect, and can send email with snap to you. Save snap image and video to FTP.
Note: by default, sanp image and video save to TF storage, if you don't have TF storage, it will also works for snap and video. The snapped image and video will save to RAM first, then send to email, upload to FTP server. As RAM resource is limited, the video will split into pieces about 1MB per file.
It's better to use TF extension board.
Is IR-CUT dual filter switch necessary?
IR-CUT dual filter switch has two filters, one is IR CUT filter not allow IR light to pass (normally >650nm wavelength), the other is AR filter that all light can pass.
It depends on working conditions, for night using only, no need to use IR-CUT dual filter switch.
For day and night all day using, you should use IR-CUT dual filter switch.
For day using, or some lens with very short back focal length, can paste IR-CUT filter glass to sensor or the end of lens.