CBF-D29 Ethernet DC power Audio in out Alarm in out RS485 Reset Analog/cvbs tail cable for ip camera -D29 module

Bottom Group

$8.50

Description

Packing list:

1 x CCTV Network Video Full funciton Cable For IP CAMERA

Color: Black

CBF-D29 Ethernet DC power Audio in out Alarm in out RS485 Reset Analog/cvbs tail cable for ip camera -D29 module

There are words on cable of port to show the functions.

Analog/CVBS BNC

Audio in

Audio out

Alarm in

Alarm out

DC power input

Ethernet RJ45

Reset

RS485

Note: not inclue camera module/board.

Interface

This product not include cable by default, please visit ip camera cable to select prefer cable.

JP1 Power interface		Preview	Pitch
1	DC12V		1.25mm
2	Video GND
3	CVBS output
4	GND
JE1 Network interface			1.25mm
1	RJ45_1 (TX+)
2	RJ45_2 (TX-)
3	RJ45_3 (RX+)
4	RJ45_6 (RX-)
5	Network connection indicator light (green light)
6	Network status indicator light (yellow light)
Sensor board J1 IR-cut interface			1.25mm
1	IR-CUT control signal 5V-
2	IR-CUT control signal 5V+
Sensor board J2 DC auto Iris interface (Support automatic aperture model: -AI)			1.25mm
1	drive-	Depend on color definition of Lens
2	damp-
3	damp+
4	drive+
Sensor board J3 Power Auto Zoom lens interface (Support Electric lens model:-AZ)			1.25mm
1	Focus A-	Depend on color definition of Lens
2	Focus A+
3	Zoom A-
4	Zoom A+
5	Zoom B+
6	Zoom B-
7	Focus B-
8	Focus B+
Sensor board J4 No definition
J5 Infrared Light board interface			1.25mm
1	Infrared Light board12V power output
2	GND
3	LED feedback signal input(0.8V-12V)
4	Infrared Light enable control
J6 function interface			1.25mm
1	Audio in	Support powerless microphone and Line in
2	Audio GND
3	Audio out
4	GND
5	Reset
6	Alarm in 1, low level effective
7	Alarm in 2 (reserve), low level effective
8	Alarm out control GPO, 3.3V level signal
9	RS_485+
10	RS_485-
JU1 USB interface			1.25mm
1	GND	Support MT7601 / RT5370 USB wifi module. Support TF card extension board.
2	USB_DP
3	USB_DM
4	5V power out
J7 expandion board			FPC
1	USB_DP
2	USB_DM
3	System
4	SDIO Work Clock
5	SDIO Data3
6	SDIO Data2
7	SDIO Data1
8	SDIO Data 0
9	System
10	SDIO Order
11	SDIO Power enable control signal
12	SDIO Card detection signal
13	SDIO Pull-up resistor power out
14	Alarm out control GPO
15	System
16	DC5V Power out