IPCM-3516DS385-D29-AZ3611 1/2" 2MP Sony IMX385 + ARM A7 CMOS Starlight Night Vision IP Camera Module 3.6-11mm Auto Zoom Lens

Empty

Total: $0.00

Checkout

Hupuu Electronics

IPCM-3516DV689-D29-AZ0550 1/3" 4MP OV4689 ARM A7 IP Camera Module 5-50mm Auto Zoom Lens IR-CUT filter

IPCM-3519VS226-D29-AZ3611 1/1.7" 12MP 4K Sony IMX226 ARM A7+A17 IP Camera Module with 3.6-11mm 3X Auto Zoom Lens

IPCM-3516DS385-D29-AZ3611 1/2" 2MP Sony IMX385 + HI3516D CMOS Starlight Night Vision IP Camera Module 3.6-11mm Auto Zoom Lens

IPCM-3516DS385-D29-AZ3611 1/2" 2MP Sony IMX385 + ARM A7 CMOS Starlight Night Vision IP Camera Module 3.6-11mm Auto Zoom Lens

SKU:

IPCM-3516DS385-D29-AZ3611

Category: Auto Zoom IP Camera Module 3.6-11mm Auto Zoom Camera Module Starlight Camera Board Starlight IP Camera Board

Video Coding Format: H.264 H.265 H.265+ Mjpeg

$158.00

Need parts to be Assembled for free? Please contact us, or leave message when checkout.

For batch orders please contact us.

Price: $155.00 - $158.00

Imaging Sensor: IMX385

Effective Pixels: 2MP

Aperture: F1.5

Bottom Group

Description

H.265 video compressing, high compression, stream control accurate, stable, support dual stream
1/2" Sony CMOS sensor , high definition 2MP
3X Optics zoom, auto zoom function
Built-in automatic day and night dual filter switching mechanism, with manual or automatic color toblack and other switching methods
support dual stream
Support network disconnect, motion detection, Video masking, intelligent out off focus alarm
Smart coding
Up to 4 ROI area,
abundant network protocol
2.0MP/1920*1080@25FPS
D-WDR, 3D Noise reduction
ONVIF2.4, GBT28181

Model	IPCM-3516DS385-D29-AZ3611
IP camera
Image Sensor	1/2 inch 2MP IMX385
CPU	3516D
Effective pixels	1920(H)x 1080(V)
Scan system	Progressive
Electronic shutter	1/25s~1/10000s
Min illuminator	Color: 0.00001Lux@F1.2,
S/N Ratio	≥50dB(AGC OFF)
IR CUT	ICR
WDR	>80dB
Noise reduction	3D reduction
Privacy masking	Up to 4 area
Lens type	3X automatic zoom lens, 1/1.8" YTOT3.6-11mm 3MP F1.5 (Not support 2.8-12mm zoom lens yet, 1/2.7" too small for 1/2" IMX385)
Video
Compression	H.265/H264/MJPEG
Main stream	1080P(1920x1080)/ 720P(1280x720)
Sub stream	D1(704x576)/VGA(640*480)/QVGA(320x240)
Video frame	1 ~ 25fps (50HZ) 1 ~ 30fps (60HZ)
Video bit rate	32KB ~ 16Mbps
Picture setting	Brightness, Contrast, saturation, sharpness, BLC AWB, AGC, AE areadjustable, support privacy masking OSD Image rotation 90°/ 270°, ICR Switch auto or manual are optional
Smart function
Smart coding	Support low bit rate, low latency, enhanced coding of ROI area, up to 4 ROIarea
Smart detection	Support intelligent masking detection, intelligent out off focus detection
Smart control	Support smart control alarm open, alarm shut, fault clear, smart noise reduction
Network
Network interface	10M/100M
Network protocol	IPv4，HTTP, TCP/IP, UDP, RTP, RTCP, UPSP, RTSP, SMTP, NTP,DHCP, DNS, PPPOE, DDNS, FTP
Access standard	ONVIF/GB28181
Client user	Up to 8 user at same time
Smart phone	iphone, ipap, Android
General
Power	DC 12V
Consumption	2W(MAX)
Temperature, humidity	-10°C~55°C，20-80%RH
Size	38X38X70mm

By default the camera module with Dual filter switch.
IR-CUT filter: wavelength > 650nm will be cut off.

AR filter: all light pass, transmission > 95%

Interface

This product not include cable by default, please visit ip camera cable to select prefer cable.

JP1 Power interface		Preview	Pitch
1	DC12V		1.25mm
2	Video GND
3	CVBS output
4	GND
JE1 Network interface			1.25mm
1	RJ45_1 (TX+)
2	RJ45_2 (TX-)
3	RJ45_3 (RX+)
4	RJ45_6 (RX-)
5	Network connection indicator light (green light)
6	Network status indicator light (yellow light)
Sensor board J1 IR-cut interface			1.25mm
1	IR-CUT control signal 5V-
2	IR-CUT control signal 5V+
Sensor board J2 DC auto Iris interface (Support automatic aperture model: -AI)			1.25mm
1	drive-	Depend on color definition of Lens
2	damp-
3	damp+
4	drive+
Sensor board J3 Power Auto Zoom lens interface (Support Electric lens model:-AZ)			1.25mm
1	Focus A-	Depend on color definition of Lens
2	Focus A+
3	Zoom A-
4	Zoom A+
5	Zoom B+
6	Zoom B-
7	Focus B-
8	Focus B+
Sensor board J4 No definition
J5 Infrared Light board interface			1.25mm
1	Infrared Light board12V power output
2	GND
3	LED feedback signal input(0.8V-12V)
4	Infrared Light enable control
J6 function interface			1.25mm
1	Audio in	Support powerless microphone and Line in
2	Audio GND
3	Audio out
4	GND
5	Reset
6	Alarm in 1, low level effective
7	Alarm in 2 (reserve), low level effective
8	Alarm out control GPO, 3.3V level signal
9	RS_485+
10	RS_485-
JU1 USB interface			1.25mm
1	GND	Support MT7601 / RT5370 USB wifi module. Support TF card extension board.
2	USB_DP
3	USB_DM
4	5V power out
J7 expandion board			FPC
1	USB_DP
2	USB_DM
3	System
4	SDIO Work Clock
5	SDIO Data3
6	SDIO Data2
7	SDIO Data1
8	SDIO Data 0
9	System
10	SDIO Order
11	SDIO Power enable control signal
12	SDIO Card detection signal
13	SDIO Pull-up resistor power out
14	Alarm out control GPO
15	System
16	DC5V Power out

Compitable Accessories

Compatible Cable

CBB-EPA2 Ethernet DC power Audio tail cable for ip camera module

From $1.12

CBW-EP Waterproof Ethernet DC power tail cable for IP Camera module

From $0.59

CBB-OBP-POE-DC power tail cable for ip poe 48v camera module with buildin POE

From $4.50

CBW-OBP-POE-DC power tail cable for ip poe 48v camera module with buildin POE module, Support POE / none POE + DC 12V power supply

From $3.60

CBW-EPA Waterproof Ethernet DC power Audio tail cable for IP Camera module

From $0.94

CBF-D29 Ethernet DC power Audio in out Alarm in out RS485 Reset Analog/cvbs tail cable for ip camera -D29 module

From $6.20

Download

Supports for private Protocol of Xmeye and other popular vendor, and full range of H.264, H.265, POE NVR (one key add, Plug-and-play);

Supports iVMS4200, XMeye CMS monitoring platform software;

Supports ONVIF 2.4 protocol;

Supports GB28181 Protocol;

Supports sub IP 11.x.x.x and 192.168.1.88 by default;

Supports HTTP CGI API;

WebCms 3.2.0.46 .zip IE activeX plugin

pConfig_1.0.1.66.zip modify camera configurations, such as WiFi, Default Language, MJPEG, Default IP address. The configuration will be the default configuration when you restore the settings.

DeviceSearch.zip

iVMS-4200(v2.6.2.7).zip HikVision protocol support

Basic FAQ for IE Browser.pdf

Quick Guide for IE Browser.pdf

IE Browser User's Manual.pdf

For Windows:

iVMS-4200: https://hupuu.com/sites/default/files/document/iVMS-4200(v2.6.2.7).zip

Support P2P remote monitor.
Support IE preview, Record(store to PC).

FAQ

What is default IP address, user and password?
Default IP:
192.168.1.88 for wired Ethernet;
192.168.1.160 for wifi;
For bulk operation, you can use sub ip 11.0.0.1 to find, config and upgrade as many cameras as you can.

Default user: admin
Default Password: admin
Does the camera support motion detect?
Yes, it support motion detect, and can send email with snap to you. Save snap image and video to FTP.
Note: by default, sanp image and video save to TF storage, if you don't have TF storage, it will also works for snap and video. The snapped image and video will save to RAM first, then send to email, upload to FTP server. As RAM resource is limited, the video will split into pieces about 1MB per file.
It's better to use TF extension board.
Is IR-CUT dual filter switch necessary?
IR-CUT dual filter switch has two filters, one is IR CUT filter not allow IR light to pass (normally >650nm wavelength), the other is AR filter that all light can pass.
It depends on working conditions, for night using only, no need to use IR-CUT dual filter switch.
For day and night all day using, you should use IR-CUT dual filter switch.
For day using, or some lens with very short back focal length, can paste IR-CUT filter glass to sensor or the end of lens.