IPFB-3516TS327 1/2.8" 2MP 1080P Sony IMX327 ARM A7 H.265 Face capture IP Starlight Security CCTV HD Camera Module board

Empty

Total: $0.00

Checkout

Hupuu Electronics

1/2.8" Sony starvis IMX327 + EN771T 2MP 1080P AHD EX-SDI HD-SDI SDI Analog F1.0 4mm Lens Starlight Security CCTV HD camera module board

A4CM-2450HS327-AFX5 1/2.8" Sony IMX327 NVP2450H AHD TVI CVI Analog 4 in 1 Starlight 1080P 2MP HD 2.7-13.5mm motorized zoom CCTV Camera Module board

IPFB-3516TS327 1/2.8" 2MP 1080P Sony IMX327 ARM A7 H.265 Face capture IP Starlight Security CCTV HD Camera Module board (2MP, IMX327)

IPFB-3516TS327 1/2.8" 2MP 1080P Sony IMX327 ARM A7 H.265 Face capture IP Starlight Security CCTV HD Camera Module board

SKU:

IPFB-3516TS327

Category: Starlight Camera Board Starlight IP Camera Board IP Camera Board 2MP 1080P IP Camera Board

Video Coding Format: H.264 H.265 Mjpeg

Face Capture

$85.00

Need parts to be Assembled for free? Please contact us, or leave message when checkout.

For batch orders please contact us.

Price: $79.00 - $85.00

Sensor Optical Format: 1/2.8"

Imaging Sensor: IMX327

Effective Pixels: 2MP

Bottom Group

Description

Professional intelligence function

Intelligent face algorithm is embedded to support face capture in complex environment. It supports face tracking, face exposure mode, and face automatic filtering.

It supports the detection, tracking, snapping, grading, and screening of moving faces, and outputs the optimal face capture.

Support face recognition area selection; Multi parameter setting, face parameter setting and professional capture rate.

It supports facial image and original picture uploading, and the quality of face picture coding can be adjusted.

Support a maximum of 12 face detection per frame.

The number of snapshots can be set up.

The face capture scenes are respectively aimed at the backlight environment and the ordinary environment with the hall scenes and the ordinary scenes. The two modes can be set up.

Support face exposure function;

It supports wide dynamic range up to 100dB and is suitable for monitoring under backlight environment.

General function

The maximum resolution can reach 2MP (1920 x 1080) 30fps real-time, more fluent video

CMOS, capturing motion images without aliasing

Adopting the latest standard H.265+ video compression technology, high compression ratio, accurate and stable code flow control.

Built in automatic day and night type dual filters switching mechanism, with manual or automatic color to turn black and other switching mode.

Support intelligent coding, maximum support for 4 ROI regions of interest

Support intelligent control, one button control alarm switch, fault clearing.

Supporting intelligent detection, 5 anomaly detection and 3 behavior analysis

Support digital wide dynamic, 3D digital noise reduction function

With multiple white balance models, it is suitable for various scenarios.

Onvif protocol, national standard GB28181

DC 12V power supply;

Model		IPFB-3516TS327
Sensro		Sony IMX327
Sensor type		1/2.8" Progressive Scan CMOS
DSP		ARM A7
Electronic shutter		1/25s~1/10000s
Minimum illumination		Color:0.0005Lux@ (F1.5, AGC ON)；; Black and white:0.0001Lux@(F1.5, AGC ON);
Signal-to-noise ratio		≥50dB(AGC OFF)
Wide dynamic range		≥100dB
noise reduction		3D digital noise reduction
Video compression standard		H.265+/H.265/H.264/MJPEG
H.265 coding type		Main Profile
KBps		32 Kbps~16Mbps
Audio compression format		G.711a/ G.711u/G.726
image
Image setting		Adjustable brightness, contrast, saturation, sharpness, white balance; AWB (automatic white balance), AGC (automatic gain), AE (automatic exposure control), AIC (automatic aperture correction); support for privacy area occlusion; OSD superposition; image rotation: Normal 90 degrees /270 degrees automatic, manual or automatic color turn black and other switching modes.
Maximum image size		1920 x 1080
Video resolution	Main stream	1080P(1920 x 1080)/720P(1280 x 720)
	Auxiliary code stream	D1(704 x 576)/VGA(640 x 480)/QVGA(320 x 240)
Video frame rate		50Hz: 25fps (1920 x 1080,1280 x 720) 60Hz: 30fps (1920 x 1080,1280 x 720)
Character superposition		Support
Smart function
Smart coding		It supports low bit rate, low latency, ROI region of interest enhancement coding, and supports 4 ROI regions.
Smart detection		Support occlusion detection, defocus detection, brightness detection, color detection, voice detection, legacy detection, mobile detection, virtual cordon, and regional intrusion.
Smart control		It supports intelligent control alarm opening, alarm closing, fault clearing, intelligent noise reduction.
Professional intelligence
Intelligent analysis		Face capture, face tracking and face automatic filtering
Picture format		Capture pictures using JPEG coding
sensitivity		0-10 adjustable, the lower the sensitivity, the higher the quality of the picture.
Regional setting		Support face recognition area selection
Upload mode		Private agreement, HikVision protocol, FTP uploading
Network function
Network protocol		IPv4, HTTP, TCP/IP, UDP, RTP, RTCP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP
Access standard		Support the latest ONVIF and national standard GB28181
Support the number of users		Up to 8 users can log in at the same time
Support mobile phone monitoring		Support the iPhone, iPad, and Android platforms
Auxiliary interface
network interface		1x RJ4510M/100M adaptive Ethernet ports
Audio interface		1 channel audio input (MIC IN/Line IN); 1 channel audio output interface
Extension interface		Support TF card storage extension (maximum 128G) /USB interface
Alarm interface		1CH low level alarm signal input, Vin<=0.3V; 1CH switch output alarm signal output, maximum support DC24V 1A or AC110V 500mA
Universal interface		1 reset buttons that support one button recovery
Conventional parameters
power supply		DC 12V
Power waste		5W(MAX)
size		38 (long) 38 (wide) 20 (high) mm (without lens)
IR-CUT aperture		22mm
weight	0.15kg

1	GND	24	BT1120 data output 13
2	/	25	BT1120 data output 14
3	IPC up and down control pin	26	BT1120 data output 15
4	/	27	SPI1_CSN0
5	/	28	SPI1_SDI
6	BT1120 data output 0	29	SPI1_SDO
7	BT1120 data output 1	30	SPI1_CLK
8	BT1120 data output 2	31	GND
9	BT1120 data output 3	32	/
10	BT1120 data output 4	33	GND
11	BT1120 data output 5	34	Reset (restore factory setting)
12	BT1120 data output 6	35	UART3_TX
13	BT1120 data output 7	36	UART3_RX
14	GND	37	NC (reserved: IPC power on peripheral chip reset)
15	BT1120 clock output	38	GND
16	GND	39	NC (Reservation: USB+)
17	/	40	NC (Reservation: USB-)
18	GND	41	GND
19	BT1120 data output 8	42	NC (reserved: 5V output)
20	BT1120 data output 9	43	NC (reserved: 5V output)
21	BT1120 data output 10	44	GND
22	BT1120 data output 11	45	/
23	BT1120 data output 12

Download

IP Camera User Manual_V1.3.doc

Supports for private Protocol of Xmeye and other popular vendor, and full range of H.264, H.265, POE NVR (one key add, Plug-and-play);

Supports iVMS4200, XMeye CMS monitoring platform software;

Supports ONVIF 2.4 protocol;

Supports GB28181 Protocol;

Supports sub IP 11.x.x.x and 192.168.1.88 by default;

Supports HTTP CGI API;

WebCms 3.2.0.46 .zip IE activeX plugin

pConfig_1.0.1.66.zip modify camera configurations, such as WiFi, Default Language, MJPEG, Default IP address. The configuration will be the default configuration when you restore the settings.

DeviceSearch.zip

iVMS-4200(v2.6.2.7).zip HikVision protocol support

Basic FAQ for IE Browser.pdf

Quick Guide for IE Browser.pdf

IE Browser User's Manual.pdf

For Windows:

iVMS-4200: https://hupuu.com/sites/default/files/document/iVMS-4200(v2.6.2.7).zip

Support P2P remote monitor.
Support IE preview, Record(store to PC).

FAQ

What is default IP address, user and password?
Default IP:
192.168.1.88 for wired Ethernet;
192.168.1.160 for wifi;
For bulk operation, you can use sub ip 11.0.0.1 to find, config and upgrade as many cameras as you can.

Default user: admin
Default Password: admin
Does the camera support motion detect?
Yes, it support motion detect, and can send email with snap to you. Save snap image and video to FTP.
Note: by default, sanp image and video save to TF storage, if you don't have TF storage, it will also works for snap and video. The snapped image and video will save to RAM first, then send to email, upload to FTP server. As RAM resource is limited, the video will split into pieces about 1MB per file.
It's better to use TF extension board.
Is IR-CUT dual filter switch necessary?
IR-CUT dual filter switch has two filters, one is IR CUT filter not allow IR light to pass (normally >650nm wavelength), the other is AR filter that all light can pass.
It depends on working conditions, for night using only, no need to use IR-CUT dual filter switch.
For day and night all day using, you should use IR-CUT dual filter switch.
For day using, or some lens with very short back focal length, can paste IR-CUT filter glass to sensor or the end of lens.