• 360°panoramic surveillance, 24MP@30fps • One camera replaces multiple normal cameras • Out-of-box installation, no on-site calibration needed • Seamless stitching technology, gain situational awareness • Sync exposure control to have a fine tuned image
provides 360º angel view, is ideal for the surveillance situations which require to display wide area in single window, create a unique and effective panoramic immersive surveillance experience. Instead of deploying multiple surveillance cameras, it only takes one set panoramic camera to have the entire area covered, which helps users to reduce unnecessary cost on cabling, installation, power consumption.
This series of camera can be used in large-scale square, traffic cross, industry park, shopping mall, stadium, exhibition&convention center, airport, seaport, etc...
Hisilicon Series High Performance DSP
1/2.8"3.0 MP Pixel progressive scan CMOS
Number of Sensor
Manual/Auto;1/5s to 1/50,000s
Color：0.02Lux @ F1.4 AGC OnB/W：0.001Lux@ F1.4 AGC On;
3.6mm lens x 8
Angle of View(lens)
horizontal 360°, vertical 360°
Angle of Adjustment
Day / Night Mode, IR cut filter
H.264 Baseline/MainProfile/HighProfile Optional
Video compression rate
Max. Image Size
24MP / 8 x 2048x1536
Electronic Pan / Tilt / Zoom
Main stream: 50Hz: 25fps( 8 x 2048x1536)
Sub stream: 60Hz: 30fps(8 x 640x480)
Noise Reduction Mode
2D / 3D
Auto white balance, Auto Gain, Auto Shutter
Brightness, saturation,sharpness, contrast
User authority, IP address filter, MAC address filter, 802.1x
Onvif V2.6.1(each stream) / CGI / SDK
1 * RJ45 10M/100M/1000M Self-adaption Ethernet port
-40℃ ~ 60℃, humidity less than 95% (No condensation)
Φ202 x 208mm
2.6 (net weight)
Supports for Hikvision, Dahua, Xmeye private Protocol, and full range of H.264, H.265, POE NVR (one key add, Plug-and-play);
Supports Hikvision iVMS4200, Dahua CMS and XMeye CMS monitoring platform software;
Supports ONVIF 2.4 protocol;
Supports GB28181 Protocol;
Supports for aevision i8 and other private protocol with extra payment;
Supports Danale P2P mobile monitoring;
WebCms 220.127.116.11 .zip IE activeX plugin
pConfig_18.104.22.168.zip modify camera configurations
iVMS-4200(v22.214.171.124).zip HikVision protocol support
mCMS User's Manual.pdf
Basic FAQ for IE Browser.pdf
Quick Guide for IE Browser.pdf
IE Browser User's Manual.pdf
Search "Danale" in your app store, or Scan to download app.
For iPhone: https://itunes.apple.com/us/app/danale/id648733750
For Android Mobile: http://d.danale.net/app_dl/android/Danale-release-5.6.4-20171013_564_jiagu_sign.apk
For Android Pad: http://d.danale.net/app_dl/android/com.danale.video.hd_5.3.1_10035.apk
For iPad: https://itunes.apple.com/us/app/danalehd/id696676587?mt=8For Mac: http://d.danale.net/app_dl/mac/DanaCMS.app.zipFor Windows:
iVMS-4200: https://hupuu.com/sites/default/files/document/iVMS-4200(v126.96.36.199).zip DanaCMS: http://d.danale.net/app_dl/pc/DanaCMS_V188.8.131.52.exe
To add camera, Make sure your mobile phone / pad / PC in the same local network, then you can find camera.
Support P2P remote monitor.Support IE preview, Record(store to PC).
What is default IP address, user and password?Default IP: 192.168.1.88 for wired Ethernet; 192.168.1.160 for wifi;
Default user: adminDefault Password: admin
Does the camera support motion detect?Yes, it support motion detect, and can send email with snap to you. Save snap image and video to FTP.Note: by default, sanp image and video save to TF storage, if you don't have TF storage, it will also works for snap and video. The snapped image and video will save to RAM first, then send to email, upload to FTP server. As RAM resource is limited, the video will split into pieces about 1MB per file.It's better to use TF extension board.
Is IR-CUT dual filter switch necessary?IR-CUT dual filter switch has two filters, one is IR CUT filter not allow IR light to pass (normally >650nm wavelength), the other is AR filter that all light can pass.It depends on working conditions, for night using only, no need to use IR-CUT dual filter switch.For day and night all day using, you should use IR-CUT dual filter switch.For day using, or some lens with very short back focal length, can paste IR-CUT filter glass to sensor or the end of lens.