1/1.8" 4MP Sony lMX347 CMOS sensor
Standard 38*38 Dual board structure
Support H.265+, H.265, H.264 encoding
Support image flip, support backlight compensation, glare suppression, 3D digital noise reduction, fog transmission, support digital wide dynamic
support IR/full color mode, support PWM dimming
Support CVBS analog video output (optional)
Support standard ONVIF
1/1.8" 4MP Sony lMX347 CMOS sensor
Standard 38*38 Dual board structure
Support H.265+, H.265, H.264 encoding
Support image flip, support backlight compensation, glare suppression, 3D digital noise reduction, fog transmission, support digital wide dynamic
support IR/full color mode, support PWM dimming
Support CVBS analog video output (optional)
Support standard ONVIF
HP385D-S25 1/2" SONY IMX385 1080P 60fps H.265 IP Starlight Security CCTV 25mm F1.5 CS Lens HD Camera Module
1/2" 2MP CMOS sensor IMX385, 38*38mm double board.
HP678D-AZ3 1/1.8" Starvis2 SONY IMX678 8MP 30fps 3.6-11mm motorized Zoom H.265 IP Starlight Security CCTV HD Camera Module board
1/1.8" 4MP Sony lMX347 CMOS sensor
Standard 38*38 single board structure
Support H.265+, H.265, H.264 encoding
Support image flip, support backlight compensation, glare suppression, 3D digital noise reduction, fog transmission, support digital wide dynamic
support IR/full color mode, support PWM dimming
Support CVBS analog video output (optional)
Support standard ONVIF
Height available: 13.7mm
Hole Distance: 22mm
Filter: 650nm IR-CUT filter
Need Screw like below to mound this holder on camera board and fix lens. (not include by default)
Model: PM2.0x4 or PM2.0x5
L: 4mm / 5mm
P: 0.4mm
d: 2mm
DK: 3.5mm
K: 1.3mm
Package List:
1pcs M12 lens holder without lens
Height available: 12mm
Hole Distance: 20mm
Filter: 650nm IR-CUT filter
Need Screw like below to mound this holder on camera board and fix lens. (not include by default)
Model: PM2.0x4 or PM2.0x5
L: 4mm / 5mm
P: 0.4mm
d: 2mm
DK: 3.5mm
K: 1.3mm
Package List:
1pcs M12 lens holder
Height available: 7mm
Hole Distance: 22mm
Need Screw like below to mound this holder on camera board and fix lens.
Model: PM2.0x4
L: 4mm
P: 0.4mm
d: 2mm
DK: 3.5mm
K: 1.3mm
Package List:
1pcs M12 lens holder
Height available: 14mm
Hole Distance: 22mm
Package List:
1pcs CS lens holder
