IPCB-3516AV510 1/2.7" 5MP OS05A10 ARM A7 single PCB IP Camera Module Board

Empty

Total: $0.00

Checkout

Hupuu Electronics

IPCB-3516DV510-D29 1/2.7" OmniVision PureCel OS05A10 ARM A7 security camera BOARD 5.0 MegaPixel 15fps FOR CCTV IP Camera

IPCB-3516AV510-D29 1/2.7" OmniVision PureCel OS05A10 ARM A7 CMOS BOARD 5.0 MegaPixel Real-Time FOR CCTV IP Camera

IPCB-3516AV510 1/2.7" 5MP OS05A10 ARM A7 single PCB IP Camera Module Board

SKU:

IPCB-3516AV510

Category: IP Camera Board 5MP IP Camera Board Single Board IP Camera Board

Video Coding Format: Analog (CVBS) H.264 H.265 H.265+ Mjpeg

$64.18

Need parts to be Assembled for free? Please contact us, or leave message when checkout.

For batch orders please contact us.

Price: $55.59 - $64.18

Sensor Optical Format: 1/2.7"

Imaging Sensor: OS05A10

Effective Pixels: 5MP

Hole Distance: 20mm

Bottom Group

Description

5.0 megapixel single Board IP Camera Module, ARM A7 OS05A10
1/2.7" 5.0 Megapixels Progressive Scan OS05A10 CMOS, ARM A7 SOC, the highest resolution of2592*1944, 0.6 Lux@F1.2 (color)
0.08 Lux@F1.2 (black and white )
38X38mm board
Support IR - CUT(day/night), adapt Bullet, Dome
H.264 or H.265 video coding, double stream, ONVIF 2.4, be compatible many NVR and platform management software.
ARM A7 SOC
Max 10fps@5.0 Megapixels (2592*1944), 25/30fps@3MP (2048*1536)
H.264/H.265 & MJPEG dual-stream encoding
3D DNR
Privacy Mask, Motion Detection
Support Onvif 2.4 protocol

Model	IPCB-3516AV510 (5MP)
Camera
Image Sensor	1/2.7" 5.0 megapixels Progressive OS05A10 CMOS
CPU	ARM A7 SOC
Effective Pixels	2560(H)*1920(V)
Scanning System	Progressive
Electronic Shutter Speed	Auto (1/25 ~ 1/10000s)
Min. Illumination	0. 6Lux/F1.2 (Color), 0.08Lux/F1.2(B/W)
S/N Ratio	≥50db(AGC OFF)
Camera Features
Day/Night	Auto(ICR)/Color/B/W
WDR	>80dB
White Balance	Auto
Gain Control	Auto
Noise Reduction	3D
Privacy Masking	Up to 4 areas
Video
Compression	H.265 Main Profile coding H264,Baseline/Main Profile/High Profile coding MJPEG Coding (Up to 3MP Non-support coding)
Resolution	25921944 / 25921520 / 20481520 / 1080P(1920×1080) / D1(704×576) / VGA(640480) / QVGA(320×240)
Main Stream	25921944, 1-25(30)fps 20481536, 1-25(30)fps 1080P 1-25(30)fps
Sub Stream	D1/VGA/QVGA(1 ~ 25/30fps)
Bit Rate	32KB ~16Mbps, support VBR, CBR
Text Overlay	Channel, Date & Time, Bit Rate
Network
Data Storage	Video record, Picture format
Trigger	Manual, Automatic(timing, motion detection, alarm, schedule, cycle )
Alarm data transmission	FTP, E-mail, Browser, CMS
Protocol	TCP/IP, UDP, RTP, RTSP, TRCP, HTTP, DNS, DDNS, DHCP, FTP, NTP, PPPOE, SMTP, UPNP
ONVIF	ONVIF 2.4
Max. User Access	8 users, IE, Google, Firefox
Smart Phone	Windows Mobile, iPhone, iPad, Android
Auxiliary Interface
Audio in	1ch MIC in/ Line in
Audio out	1ch audio out
BNC Video out	Support 1ch CVBS output (D1 704x576)
RS422/RS485	Support
USB	1ch USB, Support (Max 128GB USB flash)
Alarm in	Support
Alarm out	N/A
IO Interface	1ch Reset
General
Power Supply	DC12V / PoE (802.3af, need extra PoE Module)
Power Consumption	< 3W
Working Environment	-20°C~+55°C , Less than 90% RH
Dimensions	38 x 38 x 10mm (without lens)
Weight	0.1kg

JP1 Power Supply Connector
1	DC12V
2	CVBS GND
3	CVBS Signal Out
4	GND
JE1 Network Connector
1	RJ45_1
2	RJ45_2
3	RJ45_3
4	RJ45_6
5	Network Connected Light (Green light)
6	Network Status Light (Yellow light)
J1 IR-CUT Connector
1	IR-CUT Control Signal 12V-
2	IR-CUT Control Signal 12V+
J3 IR Light Board Connector
1	IR Light Board Power Supply (12V)
2	GND
3	IR Feedback Signal Input (0.8V-12V)
4	IR PWM Control
J2 Functions Connector
1	Audio In (MIC/ Line )
2	GND (Audio)
3	Audio Output
4	Reset
5	GND
6	USB_DP
7	USB_DM
8	5V poweer Output
9	Alarm Output Control GPO(3.3V)
10	Alarm Input (Low Level)

Interface

JP4 Power interface
1	DC12V
2	Video GND
3	CVBS Signal Out
4	GND
J6 Network interface
1	RJ45_1 (TX+)
2	RJ45_2 (TX-)
3	RJ45_3 (RX+)
4	RJ45_6 (RX-)
5	Network connector light(Green)
6	Network status light(Yellow)
J1 IR-cut interface
1	IR-CUT control signal 12V-
2	IR-CUT control signal 12V+
J3 LED Board interface
1	LED board 12V power out
2	GND
3	LED feedback signal (0.8V-12V)
4	Infrared light enable control
J2 Function interface
1	Audio in
2	Audio GND
3	Audio out
4	Reset
5	GND
6	USB_DP
7	USB_DM
8	5V power out
9	alarm out I/O
10	Alarm in 1

Compitable Accessories

Compatible Cable

CBB-OBP-POE-DC power tail cable for ip poe 48v camera module with buildin POE

From $4.50

CBB-EPA2 Ethernet DC power Audio tail cable for ip camera module

From $1.12

CBW-EP Waterproof Ethernet DC power tail cable for IP Camera module

From $0.59

CBW-EPA Waterproof Ethernet DC power Audio tail cable for IP Camera module

From $0.94

CBW-O-POE tail cable for ip poe 48v camera module

From $1.20

CBW-OBP-POE-DC power tail cable for ip poe 48v camera module with buildin POE module, Support POE / none POE + DC 12V power supply

From $3.60

Download

Supports for private Protocol of Xmeye and other popular vendor, and full range of H.264, H.265, POE NVR (one key add, Plug-and-play);

Supports iVMS4200, XMeye CMS monitoring platform software;

Supports ONVIF 2.4 protocol;

Supports GB28181 Protocol;

Supports sub IP 11.x.x.x and 192.168.1.88 by default;

Supports HTTP CGI API;

WebCms 3.2.0.46 .zip IE activeX plugin

pConfig_1.0.1.66.zip modify camera configurations, such as WiFi, Default Language, MJPEG, Default IP address. The configuration will be the default configuration when you restore the settings.

DeviceSearch.zip

iVMS-4200(v2.6.2.7).zip HikVision protocol support

Basic FAQ for IE Browser.pdf

Quick Guide for IE Browser.pdf

IE Browser User's Manual.pdf

For Windows:

iVMS-4200: https://hupuu.com/sites/default/files/document/iVMS-4200(v2.6.2.7).zip

Support P2P remote monitor.
Support IE preview, Record(store to PC).

FAQ

What is default IP address, user and password?
Default IP:
192.168.1.88 for wired Ethernet;
192.168.1.160 for wifi;
For bulk operation, you can use sub ip 11.0.0.1 to find, config and upgrade as many cameras as you can.

Default user: admin
Default Password: admin
Does the camera support motion detect?
Yes, it support motion detect, and can send email with snap to you. Save snap image and video to FTP.
Note: by default, sanp image and video save to TF storage, if you don't have TF storage, it will also works for snap and video. The snapped image and video will save to RAM first, then send to email, upload to FTP server. As RAM resource is limited, the video will split into pieces about 1MB per file.
It's better to use TF extension board.
Is IR-CUT dual filter switch necessary?
IR-CUT dual filter switch has two filters, one is IR CUT filter not allow IR light to pass (normally >650nm wavelength), the other is AR filter that all light can pass.
It depends on working conditions, for night using only, no need to use IR-CUT dual filter switch.
For day and night all day using, you should use IR-CUT dual filter switch.
For day using, or some lens with very short back focal length, can paste IR-CUT filter glass to sensor or the end of lens.